Mikrotik Pakistan

How to Make a Power Over Ethernet (PoE) Adapter Many of us may feel the need to wall-mount our wireless routers on a wall or even outdoors in the balcony or garden. However, the lack of a nearby plug point is often a stumbling block because such a situation is rarely thought of while electrically wiring a home. Getting an electrician to create an electrical point will cost you Rs 800 to Rs 1,000, or even more. So what do you do to get your router out there without spending that much? PoE or Power over Ethernet seems like the only answer, but a PoE injector would also cost you a few hundred rupees and is not so easily available. We show a technique, using which, you can make a PoE cable by yourself with absolutely no cost involved. All you need is a sharp knife and some electrical tape, but be prepared to cut your router’s power adapter wire, as well as the Ethernet cable. Do this at your own risk. Step 1Step 1 To begin with, cut off the router’s DC power adapter

Configration Mikrotik Router as PPPOE + DHCP ON Same Interface Plz use the following script to config /interface ethernet set 0 name=lan set 1 name=wan /ip hotspot profile add dns-name=login.link.tech hotspot-address=192.168.1.1 name=hsprof1 /ip hotspot user profile set [ find default=yes ] idle-timeout=none keepalive-timeout=2m /ip pool add name=hs-pool-1 ranges=192.168.1.2-192.168.1.254 add name=ppp ranges=10.0.0.1-10.0.0.100 /ip dhcp-server add address-pool=hs-pool-1 disabled=no interface=lan lease-time=1h name=dhcp1 /ip hotspot add address-pool=hs-pool-1 addresses-per-mac=1 disabled=no interface=lan \     name=hotspot1 profile=hsprof1 /ppp profile set 0 local-address=hs-pool-1 remote-address=ppp /tool user-manager customer add backup-allowed=yes disabled=no login=admin password="" \     paypal-accept-pending=no paypal-allowed=no paypal-secure-response=no \     permissions=owner signup-allowed=no time-zone=-00:00

How To Take Script In Mikrotik mikrotik 1. Open terminal in mikrotik. 2. Use this command to export script. Command is: expo comp 3. This command generate whole mikrotik setting. 4. Copy all setting and save it.

Mikrotik 4 WAN Load Balancing Full Script Some time You need a script to merage four line of same/different ISP. Is to get single output like 4 WAN Loadbalancing wan1+wan2+wan3+wan4. follow the instruction below. Set the name and ip address like that each interface. WAN1 IP 192.168.1.2/24 WAN2 IP 192.168.2.2/24 WAN3 IP 192.168.3.2/24 WAN4 IP 192.168.4.2/24 Local IP 192.168.0.1/24 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 /ip address add address=192.168.0.1/24 network=192.168.0.0 broadcast=192.168.0.255 interface=Local add address=192.168.1.2/24 network=192.168.1.0 broadcast=192.168.1.255 interface=WAN1 add address=192.168.2.2/24 network=192.168.2.0 broadcast=192.168.2.255 interface=WAN2 add address=192.168.3.2/24 network=192.168.3.0 broadcast=192.168.3.255 interfa